A long-term-test BYD Dolphin in Brazil had been pulling to the right after an earlier accident that broke a wheel. The car was inspected by Car13, the workshop that follows the magazine’s long-term-test vehicles, after it drove over a fallen metal divider on the Presidente Dutra Highway. Two earlier alignment checks had suggested either a need for camber adjustment or a faulty electric-steering sensor, but neither diagnosis had resolved the problem.
At Car13, mechanic William Artigiani found no bent shock absorber, damaged bushing, warped control arm or looseness. He did hear a noise from the right side, possibly from the shock absorber bump-stop kit. On the alignment rig, the front wheels showed a 0°02″ misalignment. Camber remained within factory specifications, while right-side caster differed from the left by 0°29″ toward the rear, still close to the factory tolerance. Artigiani considered whether the impact might have shifted the subframe, but made no mechanical adjustment.
Instead, he used a diagnostic scanner to calibrate both the steering-column sensor and the steering-rack sensor. The Dolphin stopped pulling right afterward. The report identifies the car as a GS 180 EV with 51,357 km, a 95-hp front-mounted electric motor and front-wheel drive. Its reported monthly consumption was 7.3 km/kWh; the figure since January 2024 was 6.3 km/kWh.
